Firmware Update for OLYMPUS DIGITAL CAMERA

[ E-M1 Mark II ]

[ Precautions when updating firmware ]

When updating the firmware from version 1.x/2.x/3.0/3.1 to 3.3, the camera settings are reset.
When updating the firmware from version 3.2 to 3.3, the camera settings are maintained.

Ver.3.3
(Aug. 04 2020)
  • Possible to use in-camera focus stacking mode with "M.ZUIKO DIGITAL ED 100-400mm F5.0-6.3 IS".
  • Image stabilization performance when using "M.ZUIKO DIGITAL ED 100-400mm F5.0-6.3 IS" has been improved.
    • * Roll compensation is available with the image stabilization function of the body, along with the pitch and yaw image stabilization function of the lens.
    • * The "M.ZUIKO DIGITAL ED 100-400mm F5.0-6.3 IS" is not compatible with 5-axis Sync IS.
Ver.3.2
(Feb. 12 2020)
  • Possible to use focus stacking photography with "M.ZUIKO DIGITAL ED 12-45mm F4.0 PRO".
  • When EVF Auto Switch is set, you can select how the viewfinder is displayed when the monitor is open.
    • Off: Disables the eye sensor. Press the button to switch between the EVF display and the monitor display.
    • On1: Eye sensor operates regardless of whether the rear monitor is open or closed. Press the button to switch between the rear-panel monitor Live View display/Super Control Panel display.
    • On2: The eye sensor does not operate while the rear-panel monitor is open. Press the button to switch between the rear-panel monitor Live View display/Super Control Panel display.
    • See the following for details.
Ver.3.1
(Jul. 09 2019)
  • Stability of operation when shooting still images has been improved.
  • Stability of EVF operation when the camera is turned on has been improved.
Ver.3.0
(Jun. 19 2019)

Following features have been added to the current function:

  • C-AF+MF to AF system
  • 5×5 to AF Target Mode
  • C-AF Center Start mode and C-AF Center Priority mode
  • Drive Priority and Detail Priority to Low ISO Processing when shooting still images
  • L100 to ISO sensitivity setting
  • "OM-Log400" to video picture mode
  • Instant Film to Art Filter
  • Frame Rate Priority to Live View Boost 2
  • Now possible to select the number of shot between 3 and 15 when shooting with Focus Stacking.

Following improvements have been made:

  • Enhanced performance of AF.
  • Improved quality of still images.
  • Now possible to play back images and change settings while writing to a card.
  • Added Selecting Multiple Pictures function.

Following new functions have been added:

  • Anti-Flicker Shooting function
  • Now possible to develop RAW data at high speeds in Olympus Workspace by using the camera's image processing engine.
Ver.2.3
(Jan. 24 2019)
  • Wireless radiowave commander FC-WR is now supported.
  • Stability of operation when using SD card (UHS-II) has been improved.
Ver.2.2
(Aug. 30 2018)
  • Stability of operation when shooting still images has been improved.
  • Corrected issue of C-AF not operating correctly when using the "LEICA DG SUMMILUX 25mm / F1.4 ASPH.(H-X025)" interchangeable lens produced by Panasonic.
Ver.2.1
(Mar. 8 2018)
  • Corrected issue of C-AF not operating correctly when using the "LEICA DG ELMARIT 200mm F2.8 / POWER O.I.S. (H-ES200)" interchangeable lens produced by Panasonic.
Ver.2.0
(Feb. 28 2018)
  • New art filter [Bleach Bypass] has been added.
  • Possible to use focus stacking photography with "M.ZUIKO DIGITAL ED 12-100mm F4.0 IS PRO".
  • Small targets have been added to AF target mode.
  • Possible to set a maximum of 35 pre-shutter frames for Pro Capture shooting.
  • Display has been improved to show that Pro Capture shooting is recording.
  • "Flicker Scan" has been added so it is possible to reduce flickering by fine adjustment of shutter speed while looking at the live view when using electronic shutter.
  • Fisheye compensation photography has been added for use of M.ZUIKO DIGITAL ED 8mm F1.8 Fisheye PRO. You can view the effects in live view while shooting images.
  • Possible to set zoom ratio during playback. Also, added pixel equivalence display to zoom ratio.
  • Pro Capture shooting is available for additional lenses.
  • Display of remaining battery power has been improved.
  • Response when assigning AF to AEL/AFL button has been improved.
  • Stability of camera operation when using OLYMPUS Capture has been improved.
  • Stability of image stabilizer operation when shooting video has been improved.
  • Performance of C-AF when shooting still images has been improved.
  • Color reproduction of photographed images has been improved.
  • Stability of operation when shooting still images has been improved.
  • Corrected issue of autofocus (AF) function not operating correctly when using the "LEICA DG ELMARIT 200mm F2.8 / POWER O.I.S. (H-ES200)" interchangeable lens produced by Panasonic.
Ver.1.4
(Dec. 19 2017)
  • Improved stability of operations when shooting while utilizing the EVF.
Ver.1.3
(Jun. 29 2017)
  • Corrected issue of AF Targeting Pad not functioning.
Ver.1.2
(May. 08 2017)
  • Improved color reproduction of EVF.
  • Corrected the issue of other brand flashes not flashing for High Res Shot, Focus Bracketing, and Focus Stacking.
  • Corrected issue of Rec View screen not displaying in the rear monitor when using EVF to shoot photos.
  • Corrected issue of home position of AF target not being retained when the power is turned off.
  • Improved stability of the battery level indicator.
  • Improved noise reduction of sequential shooting while the lens's IS is on.
  • Flash controllers manufactured by Profoto are supported.
Ver.1.1
(Mar. 02 2017)
  • Stability of RAW file formation has been improved.
/