Firmware Update for OM Digital Solutions DIGITAL CAMERA

[ E-M1X ]

[ Precautions when updating firmware ]

  • Be sure to have a fully charged battery in the camera.
    Without sufficient power, the update may fail or will not start.
  • It takes time to complete the update depending on the internet speed due to the large file size for the firmware.
  • Do not disconnect the USB cable during the update until the OK icon is displayed.
    It takes about 5 minutes until the OK icon is displayed after the writing icon is displayed on the monitor of the camera.
Ver.2.2
(Jul. 19 2021)
  • Corrected the following problems that occurred when connecting to an external recorder with Monitor or Record output mode:
    • * The external recorder does not start recording when pressing the camera's record button if REC Bit is On.
    • * Time code is not transmitted to the external recorder if Time Code is On.
Ver.2.1
(Apr. 06 2021)
  • USB transmission with Mac equipped with M1 chip is now supported.
  • Stability of connection with ATOMOS products has been improved.
Ver.2.0
(Dec. 03 2020)
  • “Birds” was added to Tracking Subject.
  • RAW output is possible for HDMI recorder NINJA V from ATOMOS Limited.
    The HDMI recorder NINJA V uses Apple ProRes RAW codec to record video.
  • Possible to use focus stacking photography with "M.ZUIKO DIGITAL ED 150-400mm F4.5 TC1.25x IS PRO".
  • Focus distance indicator can be displayed when shooting with manual focus.
  • Stability of image stabilizer operation when shooting video has been improved.
Ver.1.3
(Aug. 04 2020)
  • Possible to use in-camera focus stacking mode with "M.ZUIKO DIGITAL ED 100-400mm F5.0-6.3 IS".
  • Image stabilization performance when using "M.ZUIKO DIGITAL ED 100-400mm F5.0-6.3 IS" has been improved.
    • * Roll compensation is available with the image stabilization function of the body, along with the pitch and yaw image stabilization function of the lens.
    • * The "M.ZUIKO DIGITAL ED 100-400mm F5.0-6.3 IS" is not compatible with 5-axis Sync IS.
Ver.1.2
(Feb. 12 2020)
  • Possible to use focus stacking photography with "M.ZUIKO DIGITAL ED 12-45mm F4.0 PRO".
  • When EVF Auto Switch is set, you can select how the viewfinder is displayed when the monitor is open.
    • Off: Disables the eye sensor. Press the button to switch between the EVF display and the monitor display.
    • On1: Eye sensor operates regardless of whether the rear monitor is open or closed. Press the button to switch between the rear-panel monitor Live View display/Super Control Panel display.
    • On2: The eye sensor does not operate while the rear-panel monitor is open. Press the button to switch between the rear-panel monitor Live View display/Super Control Panel display.
    • See the following for details.
Ver.1.1
(Jun. 19 2019)
  • Now possible to develop RAW data at high speeds in Olympus Workspace by using the camera's image processing engine.